You love your granite counters, and you may care for them like they’re your own children, but accidents happen, and sometimes your precious granite can get stained, cracked or chipped. If there’s any good news, it’s that do-it-yourself granite repair is possible as long as you have a little know-how and the right tools for the job. This post from your favorite granite fabricators in northern Minnesota will teach you how you can fix any type of damage that may occur.
Granite sealer is meant to protect and repel all sorts of stains from penetrating the stone. However, that sealer isn’t perfect, and stains can still get through it, especially if the stain isn’t wiped up as soon as possible. All stains will need to be treated by creating a poultice with dry flour and a wicking agent. After cleaning up the spill, cover the stain with your poultice and place plastic wrap on top of it to speed up the drying time. The paste should take about 24 hours to work its magic, at which point you can scrape it off with a putty knife.
Dropping a heavy pot or pan on your counter can easily cause a piece of it to chip off. Not only do chips look bad, but they also leave your stone vulnerable to stains, since the chipped area is unsealed. Luckily, small chips can be fixed using epoxy resin. Spread the epoxy on top of the chip using a putty knife and smooth it out using a sharp blade. Once the epoxy has hardened, reseal the stone to ensure that it’s protected from any further damage.
Like chips, cracks can be repaired using epoxy resin, but be sure to get an epoxy that’s less viscous. “Thinner” epoxy is more likely to seep down into the stone to ensure the two sides of the cracks are bound together. Again, be sure to apply sealer once the epoxy is dry.
Tips to avoid damage
You can save yourself from dealing with any of the damage mentioned above by properly caring for your countertops. Follow the pointers below and you’ll probably never need to worry about repairs:
- Seal: You’ve probably noticed that we mentioned sealing quite a few times in this post. That’s because it’s imperative that your granite is sealed to protect against stains. Normal wear and tear reduces the layer of sealant, so it’ll need to be resealed every few years.
- Clean: Keeping your counters free from dirt and grime lessens the chances of scratches. Additionally, be sure to wipe up any stains as soon as you see them. The longer they sit, the harder they are to remove.
- Use trivets and cutting boards: Though your granite is tough, it’s not tough enough to withstand constant cutting and heat from pots and pans. Use a cutting board to chop up your food, and always put hot dishes on a trivet instead of directly on the countertop.
When the time comes for new kitchen or bathroom counters, be sure to get in touch with L & L Granite Countertops! Our wide selection of beautiful and durable granite counters makes us the number one granite fabricators in northern Minnesota.